antas-332 Modified Construction Silicone Sealant

Description :

Antas-332 is a one-component modified silicone sealant with room temperature curing and low modulus. It exhibits good adhesion and resistance to weather and stain. It can be brushed with paintings on the surface. Also, it’s environmental-friendly and has excellent adhesion to concrete, calcium carbonate board, fiber cement board, stone, ceramic and other porous materials. It is mainly used for waterproofing and joint sealing of wall panels on prefabricated buildings, also, could be used for joint sealing on other buildings.

antas-332 Modified Construction Silicone Sealant

antas-331 MS Hybrid Sealant

Description :

Antas-331 MS hybrid sealant is one-component, low-modulus, room temperature curing. It shows level 20 movement ability and low VOC property, which can be widely used for window frame, autoclaved lightweight concrete board, insulation board.

antas-331 MS Hybrid Sealant

antas-293 Modified Polyurethane Sealant

Description :

Antas-293 is one-component, low-modulus, neutral curing polyurethane sealant. It is safe and environment friendly with good weatherproofing ability. It shows good adhesion to concrete, aluminum, glass, and stone materials.

Standard: JC/T 881-2013

antas-293 Modified Polyurethane Sealant

Antas-636 MS Anti Mould Sanitary Sealant

Description :

Antas-636 is one-component, high modulus, neutral, room temperature curing modified silane sealant with 20 class displacement capacity. It has excellent anti-microbial and mildew proofing performance.it is safe and environmentally friendly with low VOC, non-toxicity. And it characterized in good weatherproof, no corrosion and good surface painting feasibility. Antas 636 is widely used on anti-microbial and mildew proofing indoor decoration glazing, especially in kitchens and bathrooms, with good adhesion to tile, glass, metal, stone and concrete.

Antas-636 MS Anti Mould Sanitary Sealant

antas-635 MS Nail Free Adhesive

Description :

antas-635 Low VOC Rapid Bond is one-component, quick-curing and environment friendly, adhesive sealant based on MS polymer. The shear strength of cured sealants can reach up to 2.5 MPa. Based on its properties of high strength and low environment impact, it is specially designed for commercial or domestic fit-out and seams between structural insulated panels (SIPs) where quick bonding and sealing is required.

antas-635 MS Nail Free Adhesive

antas 622 MS sealant

Description :

Antas-622 is a one component, modified silicone gap filler. It is user friendly for interior gap sealing with no odor or organic solvent. Once cured, it exhibits good flexibility and is non soluble in water. It may be used for general gap sealing around internal wall panels, ceilings, window or door frames, kickboard, floorboards, baseboard, cupboards and wardrobes.

antas 622 MS sealant