Antas-168-25 Two-Component Structural Silicone Sealant

Description :

antas-168 is two-component, neutral curing silicone structural sealant. It is specially designed for structural glazing in Curtain Wall. It has excellent performance of structural glazing and weather-resistant, and can be used in broad temperature range with excellent structural sealing.

Antas-168-25 Two-Component Structural Silicone Sealant

antas-1302 Hot Melt Butyl Sealant

Description :

Antas-1302 is a simple component hot melt polyisobutylene sealant with permanent plasticity. It is used as primary sealant for insulating glass and remain excellent flexibility and sealing properties over a wide range of temperatures. Antas-1302 has very low moisture vapor and gas permeability. It does not contain any solvent and does not cause cloud.  Together with secondary sealants, it forms flexibility sealing system for insulating glass.
 

Standard: JC/T 914

antas-1302 Hot Melt Butyl Sealant

antas-165 Two-Component Silicone Sealant for Insulating Glass (IGU)

Description :

antas-165 is two-component, non-structural, neutral-curing sealant for insulating glass. It is used as the secondary sealing in an insulating glass unit. It has good adhesion to most building materials without corrosion or stain to metal, glass, concrete, marble and etc. It has excellent weathering performance with over 15 years’ service life-time under general environment. 
 

antas-165 Two-Component Silicone Sealant for Insulating Glass (IGU)

antas-166 Two Component Structural Silicone Sealant for Insulating Glass | silicone structural sealant

Description :

antas-166 is two-component, neutral curing silicone structural sealant. It is specially designed for structural glazing in Insulating Glass, and with the advantage of high strength, high modulus, etc.. It has excellent performance of adhesion, weather resistance, high and low temperature resistance. It fully meets the requirements of structural assembly of insulating glass.

antas-166 Two Component Structural Silicone Sealant for Insulating Glass | silicone structural sealant

antas-355 Two-component Modified Silicone Sealant

Description :

Antas-355 is a two-component, room temperature rapid curing modified silicone sealant. It has excellent adhesion, resistance to weather and pollution, and is safe and environmental-friendly. Antas-355 can be applied coatings on the surface. It also has outstanding adhesion to porous materials such as concrete, calcium silicate board, fiber cement board, stone and ceramics. It is mainly used for waterproof joint sealing of fabricated building wallboard, and can also be used for joint sealing of other buildings. The movement capacity is ±25%.

Standard: GB/T 14683-2017
                 JC/T 881-2017

antas-355 Two-component Modified Silicone Sealant

antas-352 Multipurpose Modified Silicone Sealant

Description :

antas-352 is one-component, low-modulus, neutral curing modified silane sealant based on α-Silane-Terminated Polyether technology. It combines excellent performances of both PU and silicone sealants. It is 35% movement capacity,15 years service lifetime.

antas-352 Multipurpose Modified Silicone Sealant